PC control recall function EQ231 DSP processing 31-BAND Audio EQUALZER

group name: AUDIO PROCESSOR

Min Order: 1 piece

brand name: Sinbosen| Audio sound system manufacturer

model: EQ-231

Nearest port for product export: Guangzhou, Yantian,Shenzhen, Shekou,Shenzhen

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, DDP, DDU, Express Delivery, DAF

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow

update time: Wed, 04 Dec 2024 00:45:11 GMT

contact supplier

Paramtents

Color black
Type audio effect processing
Application Concert, stage, KTV, Home Theatre
Power Supply Switching Power Supply
Warranty 1 years

Packging & Delivery

55cm x28cm x11cm
Min Order1 piece

Briefing

Audio qualizer EQ231.SAVE,RECALL,EQ/BYPASS FUNCTION. Connecting to PC by USB cable, performing convenient adjustment control.

Detailed

EQ231 Specifications

The power supply mode	220V
Transmission gain ratio	-12dB-12dB
Line input impedance	15KΩ
Line output impedance	300Ω
Frequency response	20Hz- 20KHz
Signal to noise ratio	92dB
The power consumption	20W

Feature

◎Standard 1 U is light and thin and can be mounted on the rack

◎Double channel synchronous control of 31 segment DSP processing equalizer

◎Each segment is equipped with LED spectrum indication, and the absolute accuracy of real-time 31 segment frequency points is 99%

◎Noise door with tip noise reduction function

◎I/O interface support multiple types: TRS 6.35/RCA Lotus/XLR Canon

CANNON balance interface

◎EQ Bypass: The Bypass diagram equalizer in the signal path

◎With the function of saving and calling, it can save various modes for calling.

Front Panel:
①SAVE: press this button to enter the SAVE interface, which shows 1-16 modes, using the selection knob to select and save. Long-press this button to enter the RELOAD MODE, long-press to reset.
②RECALL: press this button to enter the RECALL mode. Using selection knob to recall 1-16 modes from the memory. Long-press this button to enter the EQ together control mode.
③EQ/BYPASS: press this button to enter the EQ parameters mode, using the selection knob to adjust the EQ parameters from 20Hz to 20kHz. GAIN is for frequency gain adjustment for each band; DELAY is for output channel delay time adjustment; VOL OUT is for output channel volume control; HIGH PASS is for high pas filter(20Hz- 50Hz); LOW PASS is for low pass filter(5kHz - 20kH2). Long-press EQ/BYPASS to enter the direct test output.
④LED indicating lights: dynamic LED lights showing the level of each band
⑤Display screen
⑥Selection knob: turn this knob to left or right side to adjust the input volume,press this knob to confirm and exit.

Back Panel:
①220V power interface
② power switch
③ PC interface: connecting to PC to control this equalizer
④ Audio R.L output/input
⑤Balance 6.3 R.L input
⑥Balance R.L output