Sinbosen k4-1400 1400 watt 4 channel professional 1u class d power amplifier

group name: 4 Ohms Stable Amplifier

Min Order: 1 piece

brand name: Sinbosen| Audio sound system manufacturer

model: K4-1400

Nearest port for product export: Guangzhou, Yantian,Shenzhen, Shekou,Shenzhen

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, FAS, CIP, FCA, DDP, DDU, Express Delivery, DAF

Acceptable payment methods: T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Westem Union, Cash, Escrow

update time: Thu, 21 Nov 2024 17:10:44 GMT

contact supplier

Paramtents

Stereo/output power 8Ω/1KHz 1400Wx4CH
Stereo/output power 4Ω/1KHz 2200Wx4CH
Bridge/output power 8Ω/1KHz 4500Wx2CH
THD（10% -1KHz） <0.1%
Signal Noise Ration >106dB
Damping coefficient >600
Type Professional Digital Power Amplifier
Channels 4 Channels Power Amplifier
Class Class D Power Amplifier
Feature 1U Power Amplifier
For Line Array Spaker 12/15 Inch
Voltage 90-240V
Application Amplifier for Stage/karaoke/concert...

Packging & Delivery

Min Order1 piece

Briefing

Sinbosen 4-1400 4 channel professional 1u class d digital power amplifier for line array speaker
1400WX4CH,8Ohm/2200WX4CH,4Ohm

Detailed

Class D digital power amplifiers are popular among users at home and abroad because of their environmental protection, energy saving, small size and utilization rate of more than 97%. Products are sold in Europe, America and other countries. You will find the Class D amplifier is cost-effective, stable, and fully protected amplifiers.

Attention!

Normally rating power should be amp-power x 1,5times comparing power of tops speaker and amp-power x 2times for the subwoofer.

To protect and extend your amplifier's working life, please don't use this amplifier under 2 ohms.

K series amplifier are suit for Middle and High speaker, not good for Subwoofer.

Performance characteristics:

✔ Volume step control.

✔ Balanced input XLR stereo (two channels), stereo and bridge modes of operation.

✔ Independent limiting, overload, overheating and short protection circuit.

- Each channel has independent overpressure and overheating.

- Load short-circuit protection.

- There is an automatic limiting function to prevent damage to the sounder.

✔ Use NTC boot soft start.

✔ With PFC automatic voltage regulator circuit.

1U Digital Amplifier	K4-1400
Output Power 1 KHz, <0.05%THD	8Ω/Stereo 4CHX1400W 4Ω/Stereo 4CHX2200W 8Ω/Bridge 2CHX4500W
Class	Class D Power Amplifier
THD (20Hz-20kHz for 1W)	<0.1%
THD (1kHz and 1 dB below clipping)	<0.05
DSP Processor	NO
Signal Noise Ration	>106dB
Frequency Response(+/-0.1dB)	10Hz-34kHz
Damping coefficient	>600
Impedance(balanced/unbalanced)	20KQ/10KQ
Gain (optional)	0.775V/1V/32dB
Output socket	Spe akon Connectors
Input socket	Combo XLR type, 3pin
Link socket	XLR type,3pin male
Protection	Short circuit, open dircuit, thermal, overload,DC,super audio protection
Power Requirement	90V-265V 50Hz(PFC)
Size(WxHxD)	483x429x44mm
Weight(net)	10.5Kg

Digital Amplifier K4-1400 Feature

1. Use ClassD power amplifier module. Unique peak clipping limiter and ripple reduction. 

2. The perfect protection system effectively reduces the losses caused by improper use. 

3. The perfect circuit design makes the bass strong and powerful, and the mid and high frequencies are transparent and clear.

4. 1U design, its light weight and very small space occupation rate.

5. It is widely used in large and medium-sized bars, banquet halls, and outdoor performances.

Amplifier K4-1400 Client Feedback

1u class d power amplifierclass d 4 channel amplifierclass d amplifier 4 channelampllifer class d profesional1u amplifier professional class d